Product Description
DK8-BX10 Early Streamer Emission(ESE) Lightning Rod is designed according to IEC Standard "High Voltage Testing Technology First Part: General Definition and Testing Requirement" and GB 50057-2010 "Design Specification of Building Lightning Protection". This lightning rod contains two parts: air termination(0.6 meter) and support accessory(1.2 meter), which can be combined into a integral through bolt. The Advance Time is 60us. Under the same installation height, the radius of protection is larger then the ordinary lightning rod. With the advantages of light-weight and low load, it adopted stainless steel material, and can be install under hostile environment.
Technical Parameter: DK8-BX10
Technical Parameter: DK-BX10
Technical Parameter: DK-BG10
Application Scope
Suitable for direct lightning protection of mobile communication base station, satellite station, warehouse, meteorological observatory, petrol station, airport station, military radar station, etc.
DK8-BX10 Early Streamer Emission(ESE) Lightning Rod is designed according to IEC Standard "High Voltage Testing Technology First Part: General Definition and Testing Requirement" and GB 50057-2010 "Design Specification of Building Lightning Protection". This lightning rod contains two parts: air termination(0.6 meter) and support accessory(1.2 meter), which can be combined into a integral through bolt. The Advance Time is 60us. Under the same installation height, the radius of protection is larger then the ordinary lightning rod. With the advantages of light-weight and low load, it adopted stainless steel material, and can be install under hostile environment.
Technical Parameter: DK8-BX10
Item No. | DK8-BX10 |
Discharge Current Capacity | 200kA(10/350) |
Amplitude Attenuation Rate | More than 70% |
Brupt Slope Damping Ratio | More than 48% |
Advance Time | 60μS |
Limiting Current Resistance Value | Less than 3 Omega |
Grounding Resistance | Less than 10 Omega |
Wind Resistance | Less than 36m/s |
Height | (0.6 meter head part + 1.2 meters accessory) |
Weight | 7.5KG |
Radius of Protection | 60 meters |
Earthing Downlead | One piece or multi pieces of steel bar (steel flat) Diameter (or equal sectional area) shall be not less than 8mm |
Technical Parameter: DK-BX10
Item No. | DK-BX10 |
Discharge Current Capacity | 300kA(10/350) |
Amplitude Attenuation Rate | More than 82% |
Brupt Slope Damping Ratio | More than 35% |
Limiting Current Resistance Value | ess than 2 Omega |
Grounding Resistance | Less than 10 Omega |
Wind Resistance | Less than 36m/s |
Height | (0.6 meter head part + 1.5 meters accessory) |
Weight | 10.6KG |
Radius of Protection | 60 meters |
Technical Parameter: DK-BG10
Item No. | DK-BX10 |
Discharge Current Capacity | 200kA(10/350) |
Amplitude Attenuation Rate | More than 85% |
Brupt Slope Damping Ratio | More than 30% |
Advance Time | 60uS |
Limiting Current Resistance Value | Less than 3 Omega |
Grounding Resistance | Less than 10 Omega |
Wind Resistance | Less than 40m/s |
Height | (0.6 meter head part + 1.2 meters accessory) |
Weight | 4.0KG |
Radius of Protection | 60 meters |
Earthing Downlead | One piece or multi pieces of steel bar (steel flat) Diameter (or equal sectional area) shall be no less than 8mm |
Application Scope
Suitable for direct lightning protection of mobile communication base station, satellite station, warehouse, meteorological observatory, petrol station, airport station, military radar station, etc.